Fiberglass Biaxial Fabric ( -45 °+ 45° )
Fiberglass Biaxial Fabric – ( +/- 45°)
Fiberglass biaxial fabric is made of fiberglass direct roving parallel aligned in +45°and -45°directions, then stitched together with or without chopped strand layer as combo mat. It is compatible with Polyester, Vinyl and Epoxy resin and widely used in boat building, wind energy, automotive, sports equipment, containers etc, suitable Vacuum infusion, hand lay-up, pultrusion, RTM forming processes.
General Data
| Code | Weight (g/m2) | +45°(g/m2) | -45°(g/m2) | Chop layer (g/m2) |
| EBX450 | 450 | 225 | 225 | - |
| EBX600 | 600 | 300 | 300 | - |
| EBXM600/225 | 825 | 300 | 300 | 225 |
| EBXM600/300 | 900 | 300 | 300 | 300 |
| EBXM600/450 | 1050 | 300 | 300 | 450 |
| EBX800 | 800 | 400 | 400 | - |
| EBXM800/225 | 1025 | 400 | 400 | 225 |
| EBXM800/300 | 1100 | 400 | 400 | 300 |
| EBXM800/450 | 1250 | 400 | 400 | 450 |
Remarks:
Roll width: Standard width in 1250mm, 1270mm, and other sizes depends on customer’s real needs, available in 200mm to2600mm.
Packing: Fiberglass biaxial fabric usually rolled on a paper tube with inner diameter 76mm. The roll is warped with plastic film, then put into carton. Lay the rolls horizontally, and can be loaded on pallets and bulk in container.
Storage: The product should be stored in a cool, water-proof area. It is recommended that the room temperature and humidity be always maintained at 15℃ to 35℃ and 35% to 65% respectively. Please keep the product in its original packaging before being used, avoiding moisture absorption.