Fiberglass Woven Roving Combo mat
Fiberglass woven roving Combo mat is made of woven roving and a layer of chopped strand by stitching with polyester yarn. It mainly be used as reinforcements in the composites industry.
It is compatible with unsaturated polyester resin, vinyl ester resin, epoxy resin and phenolic resin etc. Applying for pultrusion, RTM, hand lay-up etc. Various for pultruded profiles, FRP body of boat, insulation board, automobile body.
General Data
Code | Weight (g/m2) | Woven roving (g/m2) | Chopped strand (g/m2) | Moisture Content | Wet speed (≤S) | Layer |
EWRM200/200 | 400 | 200 | 200 | ≤0.2 | 60 | 2 |
EWRM300/300 | 600 | 300 | 300 | ≤0.2 | 60 | 2 |
EWRM400/300 | 700 | 400 | 300 | ≤0.2 | 60 | 2 |
EWRM500/300 | 800 | 500 | 300 | ≤0.2 | 60 | 2 |
EWRM500/450 | 950 | 500 | 450 | ≤0.2 | 60 | 2 |
EWRM600/300 | 900 | 600 | 300 | ≤0.2 | 60 | 2 |
EWRM600/450 | 1050 | 600 | 450 | ≤0.2 | 60 | 2 |
EWRM800/300 | 1100 | 800 | 300 | ≤0.2 | 60 | 2 |
EWRM800/450 | 1250 | 800 | 450 | ≤0.2 | 60 | 2 |
Remarks:
Roll width: Standard width in 1250mm, 1270mm, and other sizes depends on customer’s real needs, available in 200mm to 2600mm.
Packing: Fiberglass woven roving combo mat usually rolled on a paper tube with inner diameter 76mm. The roll is warped with plastic film, then put into carton. Lay the rolls horizontally, and can be loaded on pallets and bulk in container.
Storage: The product should be stored in a cool, water-proof area. It is recommended that the room temperature and humidity be always maintained at 15℃ to 35℃ and 35% to 65% respectively. Please keep the product in its original packaging before being used, avoiding moisture absorption.